OWC Mercury Rack Pro Guide de l'utilisateur télécharger pdf (Page 11)

2.4 Converting to Desktop Unit

The OWC Mercury Rack Pro can be converted from a rack mounting enclosure to a

desktop unit by removing the rack pulls from the sides of the enclosure, and attaching

the included rubber feet to the enclosure.

To remove the rack pulls, simply remove the 4 Phillips screws on the side of the rack

and the rack pull will come o.

Once you have removed the rack pulls, turn the OWC Mercury Rack Pro over and at-

tach the 4 rubber feet using a Phillips screwdriver to the bottom of the enclosure.

OWC Mercury Rack Pro Chapter 2 - System Setup

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

Pas de commentaire

OWC Mercury Rack Pro Guide de l'utilisateur Page 11