OWC SuperSlim Manuel télécharger pdf (Page 3)

Slide the drive mechanism through the front opening of the bottom case until

it the drive is fully inserted into the bridge card and is ush with the front of

the drive opening.

On the back and side of the enclosure you will see 3 cutouts for screws to be

inserted into the optical drive mechanism. Secure the optical drive mechanism

to the bottom case with the included Phillips collared screws.

NOTE: Some factory drives have aluminum foil covering the side of the drive mechanism. You can either

remove the foil, or simply screw through it.

1 2 3 4

Pas de commentaire

OWC SuperSlim Manuel Page 3