OWC Multi-Mount Manuel d'installation télécharger pdf (Page 25)

Here you see a completed assembly comprised of one set of 3.5” OWC

Multi-Mount drive brackets, and two sets of 2.5” OWC Multi-Mounts, all

assembled into one unit.

The 2.5” OWC Multi-Mount is attached to the 3.5” OWC Multi-Mount us-

ing 6 of the ne thread Phillips screws included with the mount - 3 per

side, 6 total per drive bracket assembly. It’s easiest to start the center

screw, but not fully tighten it, and then insert the outer two screws. This

assures that you have the bracket lined up perfectly before continuing.

OWC Multi-Mount Chapter 5 - Bracket Assembly

5 OWC MULTI-MOUNT ASSEMBLY

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 31 32

Pas de commentaire

OWC Multi-Mount Manuel d'installation Page 25