OWC OWCDIDIMM11D2 Manuel d'installation télécharger pdf (Page 9)

2 Disassembly

Insert the logic board removal tool into the 2 holes on the logic board.

The tool will go all the way down through the holes.

Conrm that the hard drive cable, and the IR Board cable are not caught

on their connectors before proceeding.

Carefully push down and pull back on the tool until the I/O wall

separates from the housing slightly.

You only want to separate the logic board from the chassis a small

amount - do not remove it more than this until the next steps are

completed or you could damage the logic board!

➥

➦

㉑

⑳

Mac mini 2011-2012 2nd Hard Drive Kit

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 27 28

Pas de commentaire

OWC OWCDIDIMM11D2 Manuel d'installation Page 9